Table of Contents
Advertisement
MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#8701】 Tool length
Set the length to the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8702】 Tool Dia
Set the diameter of the sphere at the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8703】 OFFSET X
This sets the deviation amount (X direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8704】 OFFSET Y
Set the deviation amount (Y direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8705】 RETURN
Set the one-time return distance for contacting again.
---Setting range---
0 to 99999.999 (mm)
【#8706】 FEED
Set the feedrate when contacting again.
---Setting range---
1 to 60000 (mm/min)
【#8707】 Skip past amout (H)
Set the difference (horizontal axis direction) between the skip read value and actual skip position.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8708】 Skip past amout (V)
Set the difference (vertical axis direction) between the skip read value and actual skip position.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8709】 EXT work sign rvs
Select when using the external workpiece coordinate system with Z shift.
Select whether to reverse the sign.
0: External workpiece offset (Z shift) without sign reversal
1: External workpiece offset (Z shift) with sign reversal
【#8710】 EXT work ofs invld
Set whether to enable external workpiece offset subtraction when setting the workpiece coordinate
offset.
0: Not subtract the external workpiece offset. (Conventional specification)
1: Subtract the external workpiece offset.
172
- Quick Links:
- Device Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
