Table of Contents
Advertisement
MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#9621】 DC1 OUT SIZE
Not used. Set to "0".
【#9622】 POLLING TIMER
Not used. Set to "0".
【#9623】 TRANS. WAIT TMR
Not used. Set to "0".
【#9624】 RETRY COUNTER
Not used. Set to "0".
【#9701(PR)】 IP addr auto set
The IP address is automatically assigned from the server.
0: Manual setting
1: Automatic setting
(Note) When the automatic setting is selected, "#11005 PC IP address, PC Subnet, PC Gateway"
【#9706】 Host No.
Select the No. of the host to be used from host 1 to host 4.
---Setting range---
1 to 4 : Host No.
【#9711】 Host1 host name
Set the host computer name.
This parameter allows the NC to easily recognize the host computer on the network. Set the host
computer's name (name registered in C:\windows\hosts) or the IP address.
<Setting example>
For host name: mspc160
For IP address: 150.40.0.111
(Note) Set the host computer's TCP/IP address if communication is not carried out correctly.
---Setting range---
15 characters (alphanumeric) or less
【#9712】 Host1 user name
Set the user name when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
【#9713】 Host1 password
Set the password when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
【#9714】 Host1 directory
Set the directory name of the host computer.
The directory released to the client (NC unit) with the host computer's server is handled as root
directory by the NC unit.
---Setting range---
31 characters (alphanumeric) or less
206
will be invalid.
- Quick Links:
- Device Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
