Cisco MDS 9000 series Command Reference Manual page 582

Hide thumbs Also See for MDS 9000 series:

Table of Contents

interface fc

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Command History

Usage Guidelines

You can specify a range of interfaces by issuing a command with the following example format:

interfacespacefc1/1space-space5space,spacefc2/5space-space7

Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number

Use the no shutdown command to enable the interface.

The channel-group auto command enables autocreation of port channels. If autocreation of port

channels is enabled for an interface, you must first disable this configuration before downgrading to

earlier software versions or before configuring the interface in a manually configured channel group.

The following example configures ports 1 to 4 in Fibre Channel interface 9.

switch# config terminal

Enter configuration commands, one per line. End with CNTL/Z.

switch(config)# int fc9/1 - 4

The following example enables the Fibre Channel interface.

switch# config terminal

switch(config)# interface fc1/1

switch(config-if)# no shutdown

The following example assigns the FICON port number to the selected Fibre Channel interface.

switch# config terminal

switch(config)# interface fc1/1

switch(config-if)# ficon portnumber 15

Related Commands

show interface

Cisco MDS 9000 Family Command Reference

Modification

This command was introduced.

Added the auto option to the channel-group keyword.

Displays an interface configuration for a specified interface.

Disables and enables an interface.

OL-8413-07, Cisco MDS SAN-OS Release 3.x