Mcast Root - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

mcast root

To configure the multicast feature, use the mcast root command in configuration mode. To revert to the

default, use the no form of the command.

Syntax Description

vsan vsan-id

Command Modes

Configuration mode.

Command History

Usage Guidelines

The following example shows how to configure the multicast root VSAN.

switch# config terminal

switch(config)# mcast root principal vsan 4001

Related Commands

OL-8413-07, Cisco MDS SAN-OS Release 3.x

mcast root {lowest | principal} vsan vsan-id

no mcast root {lowest | principal} vsan vsan-id

Specifies the lowest domain switch as root.

Specifies the principal switch as root.

Specifies the VSAN ID. The range is 1 to 4093.

Modification

This command was introduced.

Displays multicast information.

Cisco MDS 9000 Family Command Reference