Cisco MDS 9000 series Command Reference Manual page 751

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

The following example configures NASB on the SSM installed in slot 4 with a link to VSAN 10, and

enables a single target LUN that is a Storage Array Controller (Peripheral Device Type = 0x0C) and up

to 10 target LUNs.

switch# config terminal

Enter configuration commands, one per line.

switch(config)# nasb module 4 vsan 10 control multiple

Related Commands

ssm enable feature

nasb rediscover module

OL-8413-07, Cisco MDS SAN-OS Release 3.x

End with CNTL/Z.

Enables the NASB feature on the Storage Services Module (SSM).

Displays the NASB configuration on the SSM.

Initiates the rediscovery of a target device used for NASB on an SSM

where the feature is enabled.

Cisco MDS 9000 Family Command Reference