Pwwn (Dpvm Database Configuration Submode) - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

pwwn (DPVM database configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

pwwn (DPVM database configuration submode)

To add a device to a dynamic port VSAN membership (DPVM) database using the pWWN, use the

pwwn command in DPVM database configuration submode. To remove a device from a DPVM database

using the pWWN, use the no form of the command.

Syntax Description

vsan vsan-id

Command Modes

DPVM database configuration submode.

Command History

Usage Guidelines

To use this command, DPVM must be enabled using the dpvm enable command.

The following example shows how to add an entry to the DPVM database.

switch# config terminal

switch(config)# dpvm database

switch(config-dpvm-db)# pwwn 11:22:33:44:55:66:77:88 vsan 1

The following example shows how to delete an entry from the DPVM database.

switch(config-dpvm-db)# no pwwn 11:22:33:44:55:66:77:88 vsan 1

Related Commands

dpvm database

Cisco MDS 9000 Family Command Reference

pwwn pwwn-id vsan vsan-id

no pwwn pwwn-id vsan vsan-id

Specifies the port WWN ID. The format is hh:hh:hh:hh:hh:hh:hh, where h

is a hexadecimal number.

Specifies the VSAN ID. The range is 1 to 4093.

Modification

This command was introduced.

Configures the DPVM database.

Displays DPVM database information.

OL-8413-07, Cisco MDS SAN-OS Release 3.x