Setup - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

setup

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

To enter the switch setup mode, use the setup command in EXEC mode.

Syntax Description

This command has no arguments or keywords.

Command Modes

Command History

Usage Guidelines

Refer to the Cisco MDS 9000 Family CLI Configuration Guide for more information on using the setup

The setup utility guides you through the basic configuration process. Type Ctrl-c at any prompt to skip

the remaining configuration options and proceed with what is configured to that point.

If you do not want to answer a previously-configured question, or if you want to skip answers to any

questions, press Enter. If a default answer is not available (for example switch name), the switch uses

what is already configured, and skips to the next question.

The following example shows how to enter switch setup mode.

switch# setup

---- Basic System Configuration Dialog ----

This setup utility will guide you through the basic configuration of

the system. Setup configures only enough connectivity for management

of the system.

*Note: setup always assumes a predefined defaults irrespective

of the current system configuration when invoked from CLI.

Press Enter incase you want to skip any dialog. Use ctrl-c at anytime

to skip away remaining dialogs.

Would you like to enter the basic configuration dialog (yes/no): yes

Cisco MDS 9000 Family Command Reference

Modification

This command was introduced.

OL-8413-07, Cisco MDS SAN-OS Release 3.x