Cisco Catalyst 2960 Software Configuration Manual page 336

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Displaying 802.1x Statistics and Status

Resetting the 802.1x Authentication Configuration to the Default Values

Beginning in privileged EXEC mode, follow these steps to reset the 802.1x authentication configuration

to the default values. This procedure is optional.

configure terminal

interface interface-id

dot1x default

show authentication interface

interface-id

copy running-config startup-config

Displaying 802.1x Statistics and Status

To display 802.1x statistics for all ports, use the show dot1x all statistics privileged EXEC command.

To display 802.1x statistics for a specific port, use the show dot1x statistics interface interface-id

privileged EXEC command.

To display the 802.1x administrative and operational status for the switch, use the show dot1x all

[details | statistics | summary] privileged EXEC command. To display the 802.1x administrative and

operational status for a specific port, use the show dot1x interface interface-id privileged EXEC

Beginning with Cisco IOS Release 12.2(55)SE, you can use the no dot1x logging verbose global

configuration command to filter verbose 802.1x authentication messages. See the

Manager CLI Commands" section on page

For detailed information about the fields in these displays, see the command reference for this release.

Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE

Enter global configuration mode.

Enter interface configuration mode, and specify the port to be configured.

Reset the 802.1x parameters to the default values.

Return to privileged EXEC mode.

Verify your entries.

(Optional) Save your entries in the configuration file.

Configuring IEEE 802.1x Port-Based Authentication

"Authentication

Show Quick Links

Chapters

Table of Contents

Catalyst 2960-s