Collecting Group Ethernet Statistics On An Interface; Displaying Rmon Status - Cisco Catalyst 2960 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Command reference manual (800 pages) ,
- Hardware installation manual (108 pages)
Table of Contents
Advertisement
Displaying RMON Status
Command
Step 6
show rmon history
Step 7
copy running-config startup-config
To disable history collection, use the no rmon collection history index interface configuration
command.
Collecting Group Ethernet Statistics on an Interface
Beginning in privileged EXEC mode, follow these steps to collect group Ethernet statistics on an
interface. This procedure is optional.
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3
rmon collection stats index [owner ownername] Enable RMON statistic collection on the interface.
Step 4
end
Step 5
show running-config
Step 6
show rmon statistics
Step 7
copy running-config startup-config
To disable the collection of group Ethernet statistics, use the no rmon collection stats index interface
configuration command.
This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# rmon collection stats 2 owner root
Displaying RMON Status
To display the RMON status, use one or more of the privileged EXEC commands in
Table 28-1
Command
show rmon
show rmon alarms
show rmon events
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
28-6
Purpose
Display the contents of the switch history table.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the interface on which to collect statistics, and enter
interface configuration mode.
•
For index, specify the RMON group of statistics. The range
is from 1 to 65535.
•
(Optional) For owner ownername, enter the name of the
owner of the RMON group of statistics.
Return to privileged EXEC mode.
Verify your entries.
Display the contents of the switch statistics table.
(Optional) Save your entries in the configuration file.
Commands for Displaying RMON Status
Purpose
Displays general RMON statistics.
Displays the RMON alarm table.
Displays the RMON event table.
Chapter 28
Configuring RMON
Table
28-1:
OL-26520-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
