Managing The System Time And Date; Understanding The System Clock - Cisco Catalyst 2960 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Command reference manual (800 pages) ,
- Hardware installation manual (108 pages)
Table of Contents
Advertisement
Managing the System Time and Date
•
•
Managing the System Time and Date
You can manage the system time and date on your switch using automatic configuration, such as the
Network Time Protocol (NTP), or manual configuration methods.
Note
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Configuration Fundamentals Command Reference on Cisco.com.
These sections contain this configuration information:
•
•
•
•
Understanding the System Clock
The heart of the time service is the system clock. This clock runs from the moment the system starts up
and keeps track of the date and time.
The system clock can then be set from these sources:
•
•
The system clock can provide time to these services:
•
•
The system clock keeps track of time internally based on Universal Time Coordinated (UTC), also
known as Greenwich Mean Time (GMT). You can configure information about the local time zone and
summer time (daylight saving time) so that the time appears correctly for the local time zone.
The system clock keeps track of whether the time is authoritative or not (that is, whether it has been set
by a time source considered to be authoritative). If it is not authoritative, the time is available only for
display purposes and is not redistributed. For configuration information, see the
Date Manually" section on page
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
5-2
Enter the show version privileged EXEC command. The line that shows the product ID also ends in
either -L (if running the LAN base image) or -S (if running the LAN Lite image). For example,
WS-C2960S-48PD-L is running LAN base; WS-C2960S-24TS-S is running LAN Lite image.
Enter the show license privileged EXEC command, and see which is the active image:
Switch# show license
Index 1 Feature: lanlite
Period left: 0
Index 2 Feature: lanbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
Understanding the System Clock, page 5-2
Understanding Network Time Protocol, page 5-3
NTP Version 4, page 5-4
Configuring Time and Date Manually, page 5-5
NTP
Manual configuration
User show commands
Logging and debugging messages
minute
0
second
5-5.
Chapter 5
Administering the Switch
"Configuring Time and
OL-26520-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
