Configuring Dscp Maps - Cisco Catalyst 2960 Software Configuration Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Configuring QoS

Configuring DSCP Maps

These sections contain this configuration information:

All the maps, except the DSCP-to-DSCP-mutation map, are globally defined and are applied to all ports.

Configuring the CoS-to-DSCP Map

You use the CoS-to-DSCP map to map CoS values in incoming packets to a DSCP value that QoS uses

internally to represent the priority of the traffic.

If these values are not appropriate for your network, you need to modify them.

Configuring the CoS-to-DSCP Map, page 33-65

Configuring the IP-Precedence-to-DSCP Map, page 33-66

Configuring the Policed-DSCP Map, page 33-67

not appropriate)

Configuring the DSCP-to-CoS Map, page 33-68

Configuring the DSCP-to-DSCP-Mutation Map, page 33-69

map are not appropriate)

shows the default CoS-to-DSCP map.

Default CoS-to-DSCP Map

Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE

Configuring Standard QoS

(optional, unless the null settings in the map are

(optional, unless the null settings in the

Show Quick Links

Table of Contents

Catalyst 2960-s