Incompatible Software And Member Image Upgrades - Cisco Catalyst 2960 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Command reference manual (800 pages) ,
- Hardware installation manual (108 pages)
Table of Contents
Advertisement
Chapter 7
Managing Switch Stacks
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Installing
(renaming):`flash1:update/c260c-lanbase-mz.122-50.SE' ->
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:New software image installed in
flash1:c260c-lanbase-mz.122-50.SE
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Removing old
image:flash1:c260c-lanbase-mz.122-50.SE
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:All software images installed.
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Requested system reload in progress...
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Software successfully copied to
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:system(s) 1
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Done copying software
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Reloading system(s) 1
This example shows that the stack detected a new switch that is running a different minor version number
than the stack. Auto-copy launches but cannot find software in the stack to copy to the switch in
version-mismatch mode to make it compatible with the stack. The auto-advise process launches and
recommends that you download a tar file from the network to the switch in version-mismatch mode:
*Mar
state UP
*Mar
(VERSION_MISMATCH)
stack_2#
*Mar
initiated for switch number(s) 1
*Mar
*Mar
*Mar
*Mar
*Mar
initiated for switch number(s) 1
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
/overwrite /dest 1 flash1:c260c-lanbase-mz.122-50.SE.tar
*Mar
For information about using the archive download-sw privileged EXEC command, see the
with Software Images" section on page
Incompatible Software and Member Image Upgrades
You can upgrade a switch that has an incompatible software image by using the archive copy-sw
privileged EXEC command to copy the software image from an existing member. That switch
automatically reloads with the new image and joins the stack as a fully functioning member.
For more information, see the
page
OL-26520-01
1 00:01:11.319:%STACKMGR-6-STACK_LINK_CHANGE:Stack Port 2 Switch 2 has changed to
1 00:01:15.547:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW_INITIATED:Auto-copy-software process
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:Searching for stack member to act
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:as software donor...
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:Software was not copied
1 00:03:15.562:%IMAGEMGR-6-AUTO_ADVISE_SW_INITIATED:Auto-advise-software process
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:Systems with incompatible software
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:have been added to the stack.
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:storage devices on all of the stack
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:members have been scanned, and it has
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:been determined that the stack can be
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:repaired by issuing the following
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:command(s):
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
"Copying an Image File from One Stack Member to Another" section on
A-38.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
`flash1:c260c-lanbase-mz.122-50.SE'
archive download-sw /force-reload
A-24.
Understanding Stacks
The
"Working
7-13
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
