Cisco Catalyst 2960 Software Configuration Manual page 840
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Command reference manual (800 pages) ,
- Hardware installation manual (108 pages)
Table of Contents
Advertisement
Displaying IPv6
Table 35-3
address types.
Table 35-3
Commands for Displaying IPv4 and IPv6 Address Types
Command
show ip http server history
show ip http server connection
show ip http client connection
show ip http client history
This is an example of the output from the show ipv6 interface privileged EXEC command:
Switch# show ipv6 interface
Vlan1 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::20B:46FF:FE2F:D940
Global unicast address(es):
Joined group address(es):
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
<output truncated>
This is an example of the output from the show ipv6 protocols privileged EXEC command:
Switch# show ipv6 protocols
IPv6 Routing Protocol is "connected"
IPv6 Routing Protocol is "static"
IPv6 Routing Protocol is "rip fer"
Interfaces:
Redistribution:
This is an example of the output from the show ipv6 static privileged EXEC command:
Switch# show ipv6 static
IPv6 Static routes
Code: * - installed in RIB
* ::/0 via nexthop 3FFE:C000:0:7::777, distance 1
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
35-12
shows the privileged EXEC commands for displaying information about IPv4 and IPv6
Purpose
Display the previous 20 connections to the HTTP server, including the IP
address accessed and the time when the connection was closed.
Display the current connections to the HTTP server, including the local and
remote IP addresses being accessed.
Display the configuration values for HTTP client connections to HTTP
servers.
Display a list of the last 20 requests made by the HTTP client to the server.
3FFE:C000:0:1:20B:46FF:FE2F:D940, subnet is 3FFE:C000:0:1::/64 [EUI]
FF02::1
FF02::2
FF02::1:FF2F:D940
Vlan6
GigabitEthernet2/0/4
GigabitEthernet2/0/
GigabitEthernet1/0/12
None
Chapter 35
Configuring IPv6 Host Functions
OL-26520-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
