Configuring System Message Logging; Understanding System Message Logging - Cisco Catalyst 2960 Software Configuration Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Configuring System Message Logging

This chapter describes how to configure system message logging on the Catalyst 2960. 2960-S, or and

2960-C switch.

For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS

Configuration Fundamentals Command Reference, Release 12.4.

Logging messages to the console at a high rate can cause high CPU utilization and adversely affect how

the switch operates.

By default, a switch sends the output from system messages and debug privileged EXEC commands to

a logging process. Stack members can trigger system messages. A stack member that generates a system

message appends its hostname in the form of hostname-n, where n is a switch number from 1 to 4, and

redirects the output to the logging process on the stack master. Though the stack master is a stack

member, it does not append its hostname to system messages. The logging process controls the

distribution of logging messages to various destinations, such as the logging buffer, terminal lines, or a

UNIX syslog server, depending on your configuration. The process also sends messages to the console.

The syslog format is compatible with 4.3 BSD UNIX.

When the logging process is disabled, messages are sent only to the console. The messages are sent as

they are generated, so message and debug output are interspersed with prompts or output from other

commands. Messages appear on the active consoles after the process that generated them has finished.

You can set the severity level of the messages to control the type of messages displayed on the consoles

and each of the destinations. You can time-stamp log messages or set the syslog source address to

enhance real-time debugging and management. For information on possible messages, see the system

message guide for this release.

Understanding System Message Logging, page 29-1

Configuring System Message Logging, page 29-2

Displaying the Logging Configuration, page 29-14

Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE

C H A P T E R

Show Quick Links

Table of Contents

Catalyst 2960-s