Creating Or Modifying An Ethernet Vlan - Cisco Catalyst 2960 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Command reference manual (800 pages) ,
- Hardware installation manual (108 pages)
Table of Contents
Advertisement
Configuring Normal-Range VLANs
Table 13-2
Ethernet VLAN Defaults and Ranges
Parameter
Default
VLAN ID
1
VLAN name
VLANxxxx, where xxxx represents four numeric
digits (including leading zeros) equal to the VLAN
ID number
IEEE 802.10 SAID
100001 (100000 plus the VLAN ID)
MTU size
1500
Translational bridge 1
0
Translational bridge 2
0
VLAN state
active
Remote SPAN
disabled
Creating or Modifying an Ethernet VLAN
Each Ethernet VLAN in the VLAN database has a unique, 4-digit ID that can be a number from
1 to 1001. VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs. To create a
normal-range VLAN to be added to the VLAN database, assign a number and name to the VLAN.
With VTP version 1 and 2, if the switch is in VTP transparent mode, you can assign VLAN IDs greater
Note
than 1006, but they are not added to the VLAN database. See the
VLANs" section on page
For the list of default parameters that are assigned when you add a VLAN, see the
Normal-Range VLANs" section on page
Beginning in privileged EXEC mode, follow these steps to create or modify an Ethernet VLAN:
Command
Step 1
configure terminal
Step 2
vlan vlan-id
Step 3
name vlan-name
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
13-8
13-11.
13-4.
Purpose
Enter global configuration mode.
Enter a VLAN ID, and enter VLAN configuration mode. Enter a new
VLAN ID to create a VLAN, or enter an existing VLAN ID to modify
that VLAN.
The available VLAN ID range for this command is 1 to 4094.
Note
For information about adding VLAN IDs greater than 1005
(extended-range VLANs), see the
Extended-Range VLANs" section on page
(Optional) Enter a name for the VLAN. If no name is entered for the
VLAN, the default is to append the vlan-id with leading zeros to the
word VLAN. For example, VLAN0004 is a default VLAN name for
VLAN 4.
Chapter 13
Range
1 to 4094.
Note
Extended-range VLANs (VLAN IDs
1006 to 4094) are only saved in the
VLAN database in VTP version 3.
No range
1 to 4294967294
1500 to 18190
0 to 1005
0 to 1005
active, suspend
enabled, disabled
"Configuring Extended-Range
"Configuring
13-11.
Configuring VLANs
"Configuring
OL-26520-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
