Cisco Catalyst 2960 Software Configuration Manual page 887

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Configuring EtherChannels and Link-State Tracking

Configuring Link-State Tracking

To disable a link-state group, use the no link state track number global configuration command.

Displaying Link-State Tracking Status

Use the show link state group command to display the link-state group information. Enter this

command without keywords to display information about all link-state groups. Enter the group number

to display information specific to the group. Enter the detail keyword to display detailed information

about the group.

This is an example of output from the show link state group 1 command:

Switch> show link state group 1

Link State Group: 1

Status: Enabled, Down

This is an example of output from the show link state group detail command:

Switch> show link state group detail

(Up):Interface up

(Dwn):Interface Down

(Dis):Interface disabled

Link State Group: 1 Status: Enabled, Down

Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn)

Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)

Link State Group: 2 Status: Enabled, Down

Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn) Gi1/0/17(Dwn)

Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)

(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled

For detailed information about the fields in the display, see the command reference for this release.

Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE

Show Quick Links

Chapters

Table of Contents

Catalyst 2960-s