Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the WebEx Node
The WebEx Node package is asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Step 2
Log in to a Cisco ASR 1000 Series Aggregation Services Router, and copy the consolidated package to the USB0 drive:
Example:
copy tftp: usb0:
Address or name of remote host {1.1.1.1}
Source filename [asr1000rp1-adventerprisek9.03.09.01.S.153-2.S1.bin]
Destination filename [asr1000rp1-adventerprisek9.03.09.01.S.153-2.S1.bin]
Step 3
Copy the sipspawmak9 package to the USB0 drive:
Example:
copy tftp: bootflash:
Address or name of remote host {1.1.1.1}
Source filename [asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg]
Destination filename [asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg]
Step 4
Expand the consolidated package into the bootflash:
Example:
Request platform software package expand file
bootflash:asr1000rp1-adventerprisek9.03.09.01.S.153-2.S1.bin to bootflash:
Step 5
Copy the expanded packages and the packages.conf file from the USB drive to the bootflash:
Example:
copy usb0:asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg bootflash:
copy usb0:packages.conf bootflash:
copy usb0:asr1000rp2-ipbase.03.08.02.S.153-1.S2.bin bootflash:
Step 6
Repeat step 1 to step 5 for the remaining packages.
Step 7
If you are running a dual RP system (hardware redundant system), perform the following step, else skip to step 9.
Step 8
Copy the expanded packages and the packages.conf file from the USB drive to the standby bootflash:
Example:
copy usb0:asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg stby-bootflash:
copy usb0:packages.conf stby-bootflash:
copy usb0:asr1000rp2-ipbase.03.08.02.S.153-1.S2.bin stby-bootflash:
Repeat this step for the remaining packages.
Step 9
Enter the configuration mode:
Example:
configure terminal
Step 10
Remove the old boot package from the bootflash:
Example:
Router(config)# no boot system
Router(config)# config-register 0x2102
Router(config)# boot system flash bootflash:packages.conf
Router(config)# exit
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
370
Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
OL-14127-17
Advertisement
Chapters
Table of Contents
Troubleshooting
