Ceop Spa - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring Port Usage: An Overview
Command or Action
Step 6
Do one of the following:
• Router(config-ctrlr-au3)# tug-2 1 t1 2 cem-group 1
unframed
• Router(config-ctrlr-au3)# tug-2 1 t1 2 cem-group 2015
timeslots list-of-timeslots
Configuring the Card Type and CEM Group for the 24-Port Channelized T1/E1 ATM CEoP SPA
To configure the card type and CEM group for the 24-Port Channelized T1/E1 ATM CEoP SPA, perform the
following steps:
SUMMARY STEPS
1. Router(config)# card type {t1 | e1} slot subslot
2. Router(config)# controller {t1 | e1} slot/subslot/port
3. Router(config-controller)# cem-group group unframed
4. Router(config-controller)# cem-group group timeslots list-of-timeslots
5. Router(config-controller)# atm
6. Router (config-controller)# exit
DETAILED STEPS
Command or Action
Step 1
Router(config)# card type {t1 | e1} slot subslot
Step 2
Router(config)# controller {t1 | e1}
slot/subslot/port
Step 3
Router(config-controller)# cem-group group
unframed
Step 4
Router(config-controller)# cem-group group
timeslots list-of-timeslots
Step 5
Router(config-controller)# atm
Step 6
Router (config-controller)# exit
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
478
Configuring the Circuit Emulation over Packet Shared Port Adapter
Purpose
Creates an SAToP CEM group or a CESoPSN
CEM group.
Purpose
Selects the card type as T1 or E1.
Selects the controller for the SPA port to be configured as T1
or E1.
Creates a SAToP CEM group and configures the port for the
clear-channel CEM mode.
Creates a CESoPSN CEM group and configures the port for
the channelized CEM mode.
Configures the port to run in the clear-channel ATM mode and
creates an ATM interface to represent the port.
or
Removes the ATM interface.
Exits the controller configuration mode.
OL-14127-17
Advertisement
Chapters
Table of Contents
Troubleshooting
