hit counter script

Cisco ASR 1000 Series Software Configuration Manual page 481

Aggregation services routers sip and spa, cisco ios xe everest 16.5
Table of Contents

Advertisement

Classifying and Scheduling Packets for the ASR 1000 Series Aggregation Services Routers
Table 46: SIP-10 Oversubscription Details
ASR 1000 Chassis Type
• ASR1000-SIP10G
• Incoming rate from SPAs.
• Outgoing rate towards ESP
Conclusion: SIP10G is always
oversubscribed.
The following table illustrates the SPA an ESP combinations that cause oversubscription with SIP-40 installed.
OL-14127-17
Maximum 4 multiplied by
11.2 Gbps
11.2 Gbps
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
ESP Type
ESP-2.5 G and ESP-5 G
(Supported only on ASR-1002)
ESP-10G
ESP-20G
ESP-40G
ESP-100G
Ingress Classification Architecture
Oversubscription State
No ESP oversubscription.
ESPs interconnect device handles
the entire 10G incoming traffic.
ESP is oversubscribed.
Example:
Input rate from (example) 3 carrier
cards is 3 multiplied by 11.2Gbps
Output rate towards
QFP=12.8Gbps
ESP is oversubscribed.
Example:
Input rate from (example) 3 carrier
cards is 3 multiplied by 11.2Gbps
Output rate towards QFP=25.6
Gbps
No ESP oversubscription.
Example:
Input rate from (example) 3 carrier
cards is 3 multiplied by 11.2Gbps
Output rate towards QFP=2*25.6
Gbps
No ESP oversubscription.
Example:
Input rate from (example) 3 carrier
cards is 3 multiplied by 11.2Gbps
Output rate towards Yoda=4*25.6
Gbps
Everest 16.5
435

Advertisement

Table of Contents
loading

Table of Contents