Accessing The Sip Console - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Accessing the SIP and SPA Consoles for Troubleshooting
Accessing the SIP Console
Use the request platform software console attach command to access the SIP console through the Cisco
ASR 1000 Series Router RP console. The SIP console is used to collect debug information about the Cisco
IOS code that is running on the SIP.
The following example shows how to access the SIP console and enter enable mode:
Router# request platform software console attach 0/0
#
# Connecting to the SPA console on 0/0.
# Enter Control-C to exit the console connection.
#
Router>enable
Router#
To exit the SIP console, enter Control-C.
Accessing the Cisco WebEx Node SPA Console
Use the hw-module subslot service-engine session command to access the Cisco WebEx Node SPA console
through the Cisco ASR 1000 Series Router RP console. You will see a VEGAS Shell prompt and have access
to the console commands.
Prerequisites
Before you can open a console session on a Cisco WebEx Node SPA, the SPA must first be configured with
a minimum of the following commands and be in the "up" state:
• ip address
• service-engine ip address
• service-engine default-gateway
The service-engine ip address command must be configured before the service-engine default-gateway
command.
Opening the Cisco WebEx Node SPA Console
The following example shows how to open the SPA console:
The SPA console default prompt is "service-spa." This prompt can be changed by configuring the
Note
service-engine hostname command.
Router# hw-module subslot 0/0 service-engine session
MontaVista(R) Linux(R) Carrier Grade Edition 5.0 (custom)
Linux/mips64 2.6.21_mvlcge500-octeon-mips64_octeon_v2_be
Vegas Shell
service-spa#
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
384
Troubleshooting the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
--
CGE 5.0 Version
Copyright (c) 1985-2008 by Cisco Systems, Inc.
All rights reserved.
OL-14127-17
Advertisement
Chapters
Table of Contents
Troubleshooting
