Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the Ethernet SPAs
Command or Action
Step 7
wanphy report-alarm wis
Example:
Router(config-controller)# wanphy report-alarm wis
Step 8
exit
Example:
Router(config-controller)# exit
Step 9
exit
Example:
Router(config)# exit
Step 10
show controllers wanphy <interface-path-id>
Example:
Router# show controllers wanphy 2/2/0
Example:
TenGigabitEthernet2/1/0
Example:
Mode of Operation: WAN Mode
Example:
SECTION
Example:
LOF = 0
Example:
LINE
Example:
AIS = 0
BIP(B2) = 6215
Example:
PATH
OL-14127-17
LOS
= 0
RDI
= 0
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Purpose
Configures selective reports for WIS-level (WSER)
alarms.
Exits from the controller configuration mode and
enters the global configuration mode.
Exits from the global configuration mode and enters
the Privileged EXEC mode.
The command output displays the default alarms
and the configured alarms.
The alarms that can be configured specifically for
line, section, path, and WIS are:
• Section-level alarms: SLOF
• Line-level alarms: LAIS, LRDI
• Physical-level alarms: PAIS, PLOP, PPLM
• WIS-level alarms: WLOS, SER, PLCD,
FEAISP, FELCDP
BIP(B1) = 30
FEBE = 0
Configuring Alarm Reporting
Everest 16.5
163
Advertisement
Chapters
Table of Contents
Troubleshooting
