Overview of the SIP
• It supports 40 Gbps of non oversubscribed throughput.
• Compatible with existing and future SPAs, ESPs, and RPs.
• It supports online-insertion-and-removal (OIR) of all SIP-10 SPAs and Cisco ASR1000-SIP40.
• Provides higher port density support of 48 point dual priority, and 96 point single priority.
• Enables enhanced QoS and timestamp support.
• Performs ingress packet prioritization based on Layer 2 or Layer 3 headers.
• Enables the flow-control the SPAs.
• Distributes line clocking reference from a single SPA to the RPs.
• It supports Onboard Failure Logging (OBFL).
• All the SPAs on Cisco ASR1000-SIP40 provide FPD support.
• From Release 3.7.0S onward, the Cisco ASR1000-SIP40 is supported on all the routers that support the
The Cisco ASR1000-SIP40 supports four half-height SPAs, two full-height SPAs, and a combination of
Note
two half-height and one full-height SPAs. The Cisco ASR1000-SIP40 does not support double-wide SPAs,
double-high SPAs having two connectors.
Cisco ASR1000-SIP10 High-Availability Features
• Online insertion and removal (OIR) of the SIP and SPAs
• Nonstop Forwarding (NSF)
• Stateful switchover (SSO)
• Frame Relay switching
• VC bundle Class of Service (CoS) precedence mapping
Supported MIBS
The following MIBs are supported in Cisco IOS XE Release 2.2 and later releases for the Cisco ASR1000-SIP10
on a Cisco ASR 1000 Series Router:
• ENTITY-MIB (RFC 4133)
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-ALARM-MIB
• ENTITY-SENSOR-MIB (RFC 3433)
• CISCO-ENTITY-SENSOR-MIB
• CISCO-EXTENDED-EXT-MIB
OL-14127-17
Cisco ASR1000-SIP10.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Supported MIBS
Everest 16.5
29