Configuring The Lan-Phy Mode - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the Ethernet SPAs
Command or Action
Example:
end
Configuring the LAN-PHY Mode
This section describes how to configure the LAN-PHY mode on the 1-Port 10GE LAN/WAN-PHY Shared
Port Adapter (SPA-1X10GE-WL-V2).
SUMMARY STEPS
1. show controllers wanphy 0/1/0
2. configure terminal
3. hw-module subslot slot/subslot enable LAN
4. exit
5. show controllers wanphy 0/1/0
DETAILED STEPS
Command or Action
Step 1
show controllers wanphy 0/1/0
Example:
Router# show controllers wanphy 0/1/0
Example:
TenGigabitEthernet0/1/0
Example:
Mode of Operation: WAN Mode
Example:
SECTION
Example:
LOF = 0
BIP(B1) = 0
OL-14127-17
Purpose
LOS
= 0
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring the LAN-PHY Mode
Purpose
Displays the configuration mode of the
LAN/WAN-PHY controller. By default, prior to
configuration of the LAN-PHY mode, the
controller operates in the WAN-PHY mode.
Everest 16.5
151
Advertisement
Chapters
Table of Contents
Troubleshooting
