Verifying The Traffic Parameter Configuration - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the ATM SPAs
Command or Action
Step 4
Step 5
Router(config-if-atm-vc)# ubr
output-pcr
Step 6
Router(config-if-atm-vc)# vbr-nrt
output-pcr output-scr output-mbs
Step 7
Step 8
Router(config-if-atm-vc)# vbr-rt
pcr scr burst
Step 9
Repeat Step 2 through Step 3 for
each PVC to be configured.
Step 10
Router(config-if-atm-vc)# end
Verifying the Traffic Parameter Configuration
Use the show atm vc command to verify the configuration of the traffic parameters for a PVC:
Router# show
atm vc
Codes: DN - DOWN, IN - INACTIVE
Interface
0/2/2.1
OL-14127-17
Purpose
Configures unspecified bit rate (UBR) quality of service (QoS) and peak cell rate
(PCR) for the PVC:
• output-pcr —Output PCR in kbps. The valid range is 48 to 149760 (OC-3) or
599040 (OC-12).
Configures the variable bit rate–nonreal time (VBR-nrt) QoS, the peak cell rate
(PCR), sustainable cell rate (SCR), and maximum burst cell size (MBS) for the PVC:
• output-pcr —Output PCR in kbps. The valid range is 48 to 149760 (OC-3) or
599040 (OC-12).
• output-scr —Output SCR in kbps. The valid range is 48 to PCR, and typically
is less than the PCR value.
• output-mbs —Output MBS in number of cells. The valid range is 1 to 65535,
depending on the PCR and SCR values. If the PCR and SCR are configured
to the same value, the only valid value for MBS is 1.
Configures the variable bit rate–real time (VBR-rt) QoS, and the PCR, average cell
rate (ACR), and burst cell size (BCS) for the PVC:
• pcr —PCR in kbps. The valid range is 48 to 149760 (OC-3) or 599040 (OC-12).
• scr —SCR in kbps. The valid range is 48 to PCR, and typically is less than the
PCR value.
• burst —Burst size in number of cells. The valid range is 1 to 65535, depending
on the PCR and SCR values. If the PCR and SCR are configured to the same
value, the only valid value for burst is 1.
Exits PVC configuration mode and returns to privileged EXEC mode.
VCD /
Name
VPI
VCI Type
1
2
32 PVC
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring Traffic Parameters for PVCs
Peak Av/Min Burst
Encaps
SC
Kbps
SNAP
UBR
149760
Kbps Cells St
UP
Everest 16.5
77
Advertisement
Chapters
Table of Contents
Troubleshooting
