Supported Features
Release
Cisco IOS XE Release 3.3.0S
Cisco IOS XE Release 3.2
Cisco IOS XE Release 2.5
Cisco IOS XE Release 3.1.0S
Cisco IOS XE Release 2.1
Supported Features
The following is a list of some of the significant hardware and software features supported by Gigabit Ethernet
SPAs and 1-Port 10-Gigabit Ethernet LAN/WAN PHY SPA on the Cisco ASR 1000 Series Routers:
• Autonegotiation. 1-Port 10 Gigabit Ethernet LAN/WAN PHY SPA does not support autonegotiation.
• Auto-MDI/MDIX detection. The SFP-GE-T module enables auto-MDI/MDIX detection on the 5-Port,
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
104
8-Port, and 10-Port Gigabit Ethernet SPAs and also on the Built-in Gigabit Ethernet Ports for the Cisco
ASR 1000 Series Aggregation Services Routers.
Overview of the Ethernet SPAs
Modification
Added support for the 1-Port 10-Gigabit Ethernet
LAN/WAN PHY SPA on the Cisco ASR 1000 Series
Aggregation Services Routers.
Added support for the 2-Port Gigabit Synchronous
Ethernet SPA on the Cisco ASR 1000 Series
Aggregation Services Routers.
The maximum number of supported 802.1Q VLANs
per Ethernet SPA was increased with the hw-module
subslot ethernet vlan unlimited global configuration
command.
Information pertaining to change in show
running-config interface Fast Ethernet
slot/subslot/port command output for
Ethernet SPA
was added.
First release. Support for the following SPAs was
introduced on the Cisco ASR1000-SIP10 on the Cisco
ASR 1000 Series Routers:
Fast Ethernet SPAs
• 4-Port FastEthernet SPA
• 8-Port Fast Ethernet SPA
Gigabit Ethernet SPAs
• 10-Port Gigabit Ethernet SPA, Version 2
• 8-Port Gigabit Ethernet SPA, Version 2
• 5-Port Gigabit Ethernet SPA, Version 2
• 2-Port Gigabit Ethernet SPA, Version 2
• 1-Port 10-Gigabit Ethernet SPA, Version 2
4-Port Fast
OL-14127-17