Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Aggregation services routers sip and spa, cisco ios xe everest 16.5

Hide thumbs Also See for ASR 1000 Series:

Table of Contents

Configuring the WebEx Node

Write the configuration to memory:

write memory

Verify that the running configuration is pointing to the correct node determined in Step 9:

show running-configuration

Make sure that you are on the same network as the Cisco ASR 1000 Series Aggregation Services Router or VPN, and

then start a WebEx meeting.

Verify that network traffic is traversing the WebEx SPA card on the Cisco ASR 1000 Series Aggregation Services Router

by running the following commands:

show platform hardware qfp act interface if-name service-engine0/0/0 statistics

show platform hardware qfp act interface if name service-engine0/1/0 statistics

Access the SIP console by using the request platform software console attach slot/subslot command.

Configuring the WebEx Node from the Bootflash

Perform the following steps to configure the WebEx Node from the bootflash in Cisco IOS XE Release 3.8.2.

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS

XE Everest 16.5

Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers

Table of Contents